NVP Software Solutions

Tag: #softwaretesting

  • Defect Management Process reduces defects – Part 1

    Last month we talked about Root Cause Analysis and mentioned that the real benefit was derived when we stopped whole classes of defects in many places. However, that gain will not be realised without a Defect Management Process. Doing Root Cause Analysis without an attached process is a waste of time. It is like carrying out a Post Implementation Review or Lessons Learned and not acting on the results.

    As mentioned previously the root case analysis will tell you where the problem originated. In a project situation with a deadline looming we may need to fix that defect for the sake of delivering the project on time and with the required functionality. The Defect Management Process needs to keep that defect in a place where we can continue to act on it and fix the root cause not just the defect itself.

    Assuming that the defect has now been fixed, we can place it in a status where it is fixed (allows the project to proceed) but not fuly closed and filed away. At this stage, Quality Assurance can take over the defect and determine if there is a long term fix that can be implemented. It is quite possible that the fix will span multiple projects and applications. After all the root cause may be a process issue that is common to many projects.

    In a couple of weeks we will discuss how to implement that fix since it may not be project specific.

    Photo by New Data Services on Unsplash

  • RCA – Why – Part 2

    Three weeks ago we asked why we would bother with Root Cause Analysis. We asked some questions and provided some answers. However that analysis concentrated on a single defect and the use of Root Cause Analysis in that case. The power of Root Cause Analysis really applies when we can solve a whole class of defects.

    There is a good chance that a problem that occurs in one place in the code has been repeated elsewhere. Errors have a tendency to be repeated! This came up recently when we were asked to look into a fix that had been implemented 20 years ago. It seemed to be unravelling. This is what is sometimes called a latent defect (one out in production code that suddenly appears). Suffice to say it was the same fix throughout the code and that Root Cause Analysis at the time it originally occurred would have been very helpful. It would have stopped the expensive and time consuming fix required recently. Root cause analysis would have paid for itself multiple times over.

    So the next time you have an error, take a look at it and see if you can put something down in the defect description indicating where it might have originated. Some classification will go a long way to describing where we need to concentrate more resources.

    October is Quality Month. Sign up for our newsletter, to see some things about Quality Month or request a copy if you are too late for this month.

    Photo by JJ Ying on Unsplash

  • Register this week for the October events at TASSQ and KWSQA

    Last chance to register for TASSQ and KWSQA

       

    NVP is at StarCanada Wednesday and Thursday this week. Stop at our booth for your free stress relieving bug.

       

    If you are in the Greater Toronto Area or Kitchener-Waterloo you might want to consider these events to network with other QA people or learn some of the new ideas in QA.

    This image has an empty alt attribute; its file name is antenna-502680-unsplash-1024x683.jpg

    NVP Software Solutions will be participating in the following software testing and quality assurance events happening this September in Ontario, Canada. The events are located in Toronto and Kitchener-Waterloo in the coming weeks. Check out the relevant websites for more information and to register. This is a great opportunity to connect with other software testing and quality assurance professionals. We hope to see you there!


    Photo by Antenna on Unsplash




    THE POWER OF DESIGN SPRINTS FOR PRODUCT TEAM

     October 29, 2019 6:00 p.m.  The Albany Club – 91 King Street East, Toronto, Ontario

    Presenters:  Leah Oliveira and Carlos Oliveira

    Reality Driven Testing

     October 30, 2019 11:30 a.m.   University of Waterloo

    Presenters:  Rob Sabourin 

  • October 2019 Software QA Events in the GTA and beyond

    If you are in the Greater Toronto Area or Kitchener-Waterloo you might want to consider these events to network with other QA people or learn some of the new ideas in QA.

    This image has an empty alt attribute; its file name is antenna-502680-unsplash-1024x683.jpg

    NVP Software Solutions will be participating in the following software testing and quality assurance events happening this September in Ontario, Canada. The events are located in Toronto and Kitchener-Waterloo in the coming weeks. Check out the relevant websites for more information and to register. This is a great opportunity to connect with other software testing and quality assurance professionals. We hope to see you there!


    Photo by Antenna on Unsplash




    THE POWER OF DESIGN SPRINTS FOR PRODUCT TEAM

     October 29, 2019 6:00 p.m.  The Albany Club – 91 King Street East, Toronto, Ontario

    Presenters:  Leah Oliveira and Carlos Oliveira

    Reality Driven Testing

     October 30, 2019 11:30 a.m.   University of Waterloo

    Presenters:  Rob Sabourin 

  • RCA – Why – Part 1

    Why bother with Root Cause Analysis on Defects? We have enough to do without adding to the work!

    1. We found a defect.
    2. We fixed the defect.
    3. We retested the defect.
    4. We closed the defect (pending success on item 3).
    5. Enough said. Let’s move on to something else!

    We acknowledge that once we have a defect, all of the above have to occur (hopefully only once and not repeatedly). But Root Cause Analysis is intended to prevent 1 – 5 ever coming back to bother us again. The key word is ever! We never want to see that defect again. In order to do that, we need to find out where it occurred, why it occurred; and make sure that combination never comes up again. In the long term this saves us a lot of money and time and allows us to concentrate on more important items.

    October is Quality Month. Sign up for our newsletter, to see some things about Quality Month or request a copy if you are too late for this month.

    Photo by JJ Ying on Unsplash

  • Trend Analysis on Defects – Part 2

    Last week we discussed some prerequisites for Trend Analysis on defects. We are only discussing defects here but there are many other project metrics that could be analysed.

    Assuming that the prerequisites from the previous blog have been satisfied, what can we determine.

    1. The trend in the number of defects in each project (after normalization by some project size measurement).
    2. The trend in the number of defects in each Priority and Severity level (again after normalization).
    3. The phase or process that consistently generates the most defects.
    4. Any weak or defect prone supplier processes.
    5. Any product weaknesses that cause consistent customer complaints.

    Once we have the information listed above, we are in a strong position to fix any weak areas and correct any issues that may be costing us customers or internal funds. This is process improvement devoted to making sure that our internal processes are the best possible and we are generating the best possible product. There is more to trend analysis than we are mentioning here, but there are entire books and conferences devoted to this topic. We have only touched the surface of one item we can measure, address and improve.

    October is Quality Month. Sign up for our newsletter, coming out next week, to see some things about Quality Month.

    Photo by Stephan Henning on Unsplash

  • Trend analysis on Defects – Part 1

    One of the items that is missed frequently in most organisations is Trend Analysis on Defects. This is the trend over time and over multiple projects. We are looking for whether things are improving or not as the case may be, over time. There are a number of prerequisites which we will discuss today prior to returning to this topic in a couple of weeks with further information.

    Prerequisites

    1. A consistent method of classifying defects with regard to Priority and Severity. I include definitions and standards for Priority and Severity either in the Test Strategy for an organisation or in every test plan for every project. Note that without this in place; it is impossible to do any trend analysis.
    2. A commitment to fairly recording defects in every phase of the project no matter what methodology you use. Otherwise it is possible to make certain phases look better than others by ignoring or failing to record the defects.
    3. A commitment from management to the years it will take to obtain sufficient statistics for trends to be meaningful.
    4. A commitment to and an understanding of the methodology used to reconcile projects that of different size and that are built in different ways. A very large project built in-house cannot be directly compared to a small project where the software was purchased.
    5. An understanding of the statistical processes that will be used to generate the trends. It is far too easy to draw the wrong conclusion
    If any of these prerequisites are not in place before anything starts, you are embarking on an expensive failure!

    Photo by Stephan Henning on Unsplash

  • September Events in the GTA and Beyond

    If you are in the Greater Toronto Area or Kitchener-Waterloo you might want to consider these events to network with other QA people or learn some of the new ideas in QA.

    This image has an empty alt attribute; its file name is antenna-502680-unsplash-1024x683.jpg

    NVP Software Solutions will be participating in the following software testing and quality assurance events happening this September in Ontario, Canada. The events are located in Toronto and Kitchener-Waterloo in the coming weeks. Check out the relevant websites for more information and to register. This is a great opportunity to connect with other software testing and quality assurance professionals. We hope to see you there!


    Photo by Antenna on Unsplash




    PRESIDENT’S DINNER – V2X (VEHICLE TO EVERYTHING) COMMUNICATIONS

     September 24, 2019 6:00 p.m.  The Albany Club – 91 King Street East, Toronto, Ontario

    Presenters: Charles Finlay, Peter Watkins, Tony Hui, Ysni Semsedini Moderator: Colin Dhillon

    Targeting Quality Conference

     September 23 – 24, 2019 6:00 p.m.  Cambridge Hotel & Conference Centre easily located on Hespeler Road in Cambridge, just off of the 401.