NVP Software Solutions

Tag: software testing

  • Isn’t there a better way to Test?

    Isn’t there a better way to Test?

    This is a question that gets asked very frequently especially at the end of projects that have not gone well. Testing is often left to the end of the project and by the time people get to it they are tired of the project, tired of the project team and generally looking for something new. Even when projects do go well; people ask the same question.

    The answer of course is “YES”. Testing can go better. But it requires a shift in the way it is done. Some people have a set methodology they use for all testing projects. Others rely on specific tools that are supposed to aid them in testing properly. Others work out what they are going to do when they get to the project. If every project was identical and things had been successful in the past then these approaches will work. However, no two projects are alike and the requirements for testing or Quality Assurance differ from project to project.

    Sometimes the differences are minor and techniques and processes used in the past can be reused with slight modifications. However, even with minor differences, testing needs to evolve over time to take into account new technologies and new methodologies. With major differences in projects and expectations much more than just a slight evolution must be undertaken. This will be the subject of the next few blogs.

    Take a look at some of the seminars that we offer that address this situation and see if they apply to your situation. Testing can be better.
    Contact us for further information.

  • June Events in Software Testing in the GTA and beyond

     

    NVP Software Solutions will be participating in the following software testing and quality assurance events happening this June in Ontario, Canada. The events are located in Toronto, Kitchener-Waterloo and London in the coming two weeks. Check out the relevant websites for more information and to register. This is a great opportunity to connect with other software testing and quality assurance professionals. We hope to see you there! (more…)

  • Quality Assurance ROI

    One of the items which comes up in most Quality Assurance discussions is the determination of what Return on Investment Quality Assurance provides. It can be hard to justify and obviously depends on the Costing Model used in your organisation. The factors in the Costing Model may differ but the overall trend is always the same. Early Quality Assurance (see last blog) alway pays.

    Here are some of the places where and how Quality Assurance pays:

    1. An error found at Requirements time will be much cheaper to fix there rather than later in the lifecycle. Estimates range from 10% of the later cost down to far less than 0.1% for even moderately complex systems.
    2. Similarly an error found at Design time has a ratio that is slightly less than Requirements but still substantial.
    3. Inclusion of Quality Assurance at an early stage will lead to root cause analysis of repeated errors saving thousands of dollars in testing and repetition of test cases.
    4. Inclusion of Quality Assurance at an early stage allows the definition and construction of an environment suitable for testing when the code becomes available. Environments may be able to be shared leading to cost savings or, at the very least, they can be designed with all the testing considerations included up front.

    The above are only a few of the places where Quality Assurance can save many thousands of dollars on the project. There are many more which could be defined and calculated.
    Our next blog will look at how Quality Assurance can provide valuable input and how that is made clear to the users.

    Take a look at some of the seminars that we offer that address this situation and see if they apply to your situation. Quality Assurance is exceedingly Cost-Efficient.

    Contact us for further information.

  • Early Involvement of Quality Assurance

    One of the items which comes up in most Quality Assurance discussions is the determination of when to involve Quality Assurance in the project. Those with the traditional view of Quality Assurance as simply Software Testing (Quality Control) delay the arrival of the Qaulity Assurance Professional until the last possible moment and are then disappointed when the testing is not done correctly or with due regard for risk. People (including some Quality Assurance personnel) believe there is nothing to be done until the software is ready and ‘complete’.

    These people are missing the value that can be contributed by Quality Assurance early in the project including the following:

    1. Assessment of Risk from a Quality Assurance point of view.
    2. Review of Requirements and Design from a Quality Assurance point of view.
    3. Proper design of the test environment and the processes surrounding it.
    4. Proper and complete design of the testcases that address the most important risks while minimising the efforts.
    5. The chance to have feedback from other project members over the course of the test design and preparation.

    Of the above items the last is probably the most important. Feedback can help find and correct deficiencies earlier rather than later.

    Our next two blogs will provide concrete examples of how and where Quality Assurance can provide valuable input.

    Take a look at some of the seminars that we offer that address this situation and see if they apply to your situation. Design review is very cost-effective.

    Contact us for further information.

  • May Events in Software Testing in the GTA and beyond

     

    NVP Software Solutions will be participating in the following software testing and quality assurance events happening this May in Ontario, Canada. The events are located in Toronto, Kitchener-Waterloo and London in the coming two weeks. Check out the relevant websites for more information and to register. This is a great opportunity to connect with other software testing and quality assurance professionals. We hope to see you there! (more…)

  • Review Design (by Writing Testcases)

    One of the easier methods of review, for a Software Tester, is to write test conditions, test objectives, or complete testcases for the design. We define Test Conditions or Test Objectives as being statements of what is to be tested without the details usually found in testcases.

    For example the following might be a few High Level Test Objectives for a design:

    1. Test that the system continues to function in the event that the link to the Postal Code database is not working.
    2. Test that the system switches to the backup node when the primary node is taken offline.
    3. Test that the database is updated with the full CDR at the end of the call.

    There is a lot of detail under these Test Objectives and potentially they could generate many, many testcases but they are all real examples and they are all necessary. They key is to look for the following while you are writing the test objectives:

    1. Two, or more, test conditions that contradict each other.
    2. Places where we find it difficult to write any objectives at all – this may be related to a lack of knowledge or the design may be incomplete. Either are issues.
    3. Places where we are guessing at the expected behaviour for our Objective. We do not expect details here but a feeling that we don’t know what the result will be or how to prove it.

    Brainstorming with other people, talking to the System Architect, looking at other similar designs and looking up technical information are all good sources for building these objectives.

    Once you have completed your personnel review, you may be asked to join a group review bringing in your comments and hearing from everyone else. There are several methods of review depending on Risk including Desk Checking, Walkthroughs, Reviews, and finally Inspections. These vary from informal to very formal. However, they are all aimed at finding the errors in the design sooner rather than later. They also all assume on previous individual work.

    Take a look at some of the seminars that we offer that address this situation and see if they apply to your situation. Design review is very cost-effective.

    Contact us for further information.

  • Review Design (by Reviewing)

    The title of this Blog may be considered to be a self-evident truth. How else would you review a design except by reviewing it? There are other ways which we will get to in a couple of weeks. However, our initial look will be by the standard method of reviewing them and what a Quality Assurance person might get out of the review.

    Reviewing a design can be difficult for some people. The following problems may arise:

    • You don’t know anything about the technical solution
    • The design is very technical
    • It is difficult to maintain concentration for an extended period of time

    There are ways around these problems. Some of them are personal and some relate to the methodology used to review the requirements.

    On the personal level:

    • Familiarise yourself with the system for which the design is being created. It will help! You cannot review in a vacuum.
    • Organise the design into sections so you can concentrate on a particular section at once.
    • Ask for a System Boundary Diagram (SBD).

    We emphasized one item above. The System Boundary Diagram can be created at many levels but the common idea is that it shows the system in a pictorial form and identifies the interfaces to external systems. The act of creating an SBD brings many problems to the surface and allows the Scope of testing to be set.

    Once you have completed your personnel review, you may be asked to join a group review bringing in your comments and hearing from everyone else. There are several methods of review depending on Risk including Desk Checking, Walkthroughs, Reviews, and finally Inspections. These vary from informal to very formal. However, they are all aimed at finding the errors in the design sooner rather than later. They also all assume on previous individual work.

    For a different way to review the design, look for our next blog on this topic.

    Take a look at some of the seminars that we offer that address this situation and see if they apply to your situation. Design review is very cost-effective.

    Contact us for further information.

  • April Events in Software Testing in the GTA and beyond

     

    NVP Software Solutions will be participating in the following software testing and quality assurance events happening this April in Ontario, Canada. The events are located in Toronto, Kitchener-Waterloo and London in the coming two weeks. Check out the relevant websites for more information and to register. This is a great opportunity to connect with other software testing and quality assurance professionals. We hope to see you there! (more…)